Blue Streak Mechanic Apprenticeship A27A0

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company has an exciting opportunity, through our IAM/Boeing Joint Apprenticeship Program, for Blue Streak Mechanic Apprenticeship in the Puget Sound region in Washington State!

This comprehensive 4-year training program consists of 8,000 hours of paid on-the-job training and essential classroom education, designed to equip you with the skills needed to excel. You will attend school for a minimum of 144 unpaid hours per school year, registered through a local Community and Technical College. Your wages as an apprentice will be defined in Article 17 of the Collective Bargaining Agreement between the International Association of Machinists District 751 and The Boeing Company, with progression to a higher wage step for every 1,000 hours of recorded on-the-job training until completion. Upon graduation from the Apprenticeship, you will be placed in the target job at the maximum rate and receive a journey-worker certificate and card recognized worldwide.

Apprentices will learn the following tasks to become proficient as a journey-level graduate of the program: Fabricate details and assemblies by hand and other mechanical means to support production, Aircraft on Ground (AOG), and/or critical spares requirements. When prints, templates, or tools are not available, develop and fabricate complex temporary shop aid templates and tools, which include forming compound curvatures and angles to support part fabrication. Accomplishment of the above tasks requires regular use of obsolete blueprints, advanced shop mathematics, trigonometry, descriptive geometry (layout and lofting), geometric dimensioning and tolerancing, and computer aided design applications such as CATIA.

Applicants should have a strong willingness and aptitude for learning, problem solving, and judgement, as well as a mindset for continuous improvement.

Application Instructions:
Review the PrepPack (link below) to confirm you meet apprenticeship minimum qualifications and for additional information.

To ensure your application is complete, all required assessments and courses must be finalized before submitting your application.

Documentation: When requested, provide documentation for all completed courses, test challenges, certificates, and degree programs.

Eligibility: Applicants must be at least 18 years of age; must be eligible for hire or rehire at Boeing; must never have been enrolled in or completed an IAM/Boeing Joint Apprenticeship program; must have a GED or a high school diploma; and must have US person status as defined by Boeing.

Proficiency in English & Math must be verified through the following:

• Completion of English 99 or higher OR a college placement test with results and placement into English 101 or higher.

• Completion of Intermediate Algebra in the last 5 years OR a college placement test with results and placement into Precalculus, Trigonometry or higher.

*Placement tests must have been taken in the last 5 years.

*We do not accept self-placement tests.

Apprenticeship Minimum Qualifications can be met by one of the three ways listed below and verified via transcripts, certifications/degrees and resume.

Vocational courses

• Basic Blueprint Reading or equivalent

• Basic Precision Measuring Tools or equivalent

Vocational certificates and degrees

• Composite Technician Certificate

• Manufacturing Composite Certificate

• Aerospace Composite Technician Certificate

• Advanced Composites Manufacturing Technician Certificate

1-year work experience in similar field below

• Bench Mechanic

• Boring Mills (Vertical, Horizontal)

• Computer Numerical Control

• Drills (Radial, Press, NC)

• Duct Prep and Fit (for Weld)

• Fastener Removal (Rivets, Hi-Loks, Screws, etc.)

• Flight Control/Control Surface Repair (Flaps, Rudders, Slats)

• Forming (Roll, Hydro, Stretch, or Brake)

• Grinding (Internal, External, Surface, Thread)

• Heat Treat

• Jig Bore, Jig Grinder

• Lathes (Conventional, NC, CNC, Turret)

• Layout (Conventional, CMM)

• Layout & Lofting (Sheet Metal, Non-Metallic, Composite)

• Mills (Conventional, NC, CNC, Profile)

• Relocating, re-drilling, and reaming holes to size

• Sheet Metal Assembly, Sheet Metal Details

• Tooling, Tool Making

• Trade-related Bench Work

Additional information Links: Apprenticeship External WebSite,  Standards of Apprenticeship,  Prep Pack.

Target Job Responsibilities:

• Fabricate details and assemblies by hand or mechanical means to support production and airline A.O.G. or critical spares requirements.

• Develop and fabricate complex temporary shop aid templates and tools when prints or templates are unavailable, including forming compound curvatures and angles.

• Utilize obsolete blueprints, advanced shop math, trigonometry, and geometric dimensioning and tolerancing to accomplish fabrication tasks.

• Collaborate with Engineering to redesign production and spare parts, including cross-section cuts and flat pattern development using manual or computer-aided methods.

• Operate various machinery (drill presses, saws, mills, etc.) to fabricate parts as required.

• Create templates, tools, and splash molds from obsolete drawings and sample parts from existing aircraft.

• Utilize CATIA for part configuration definition and layout and lofting as necessary.

• Ensure that detail and assembly fabrication meet drawing configurations and tolerances.

• Perform riveting, bonding, and sealing as required during assembly processes.

• Obtain work orders and drawings and determine the necessary materials and fasteners for each job, checking material against work orders for correct quantity and quality assurance acceptance.

• Develop three-dimensional aids using sheet metal practices and shop mathematics, including layout and lofting methods.

• Cut, bend, punch, and dimple sheet metal parts, ensuring proper
  dimensions and preparation for installation.

• Assemble parts using rivets and bolts, employing the correct tools and techniques as specified by engineering requirements.

• Handle and dispose of hazardous materials in an approved manner and obtain supplies for applying finishes such as alodine, primer, sealant, and adhesives.

• Conduct first part checks for conformance to specifications, mark parts as required for identification, and leave oral or written tie-ins for following shifts.

• Rework and incorporate changes to assemblies to meet engineering specifications and coordinate with engineering to address
  manufacturing challenges.

• Maintain personal and tool certifications as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

Basic Qualifications/Requirements:

• Experience doing jobs or tasks where you had to apply Math skills such as: Algebra, geometry and/or trigonometry.

• Experience reading engineering blueprints and drawings.

• Experience working with precision measuring tools.

• Proficiency in reading, writing, and speaking English.

Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Education & Experience:

High School Graduate or the equivalent. Proof of successful completion is required.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift Work Statement:

This position is for shifts 1; however, it may require some training on shift 2.

Other Relevant Information & Requirements:

This is an hourly position governed by the IAM Collective Bargaining agreement.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay Rate: $44.53

Applications for this position will be accepted until Sept. 11, 2026

Language Requirements

English Preferred

Education

High School Diploma or Equivalent Required

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Experience Level
Hourly
Contingent Upon Program Award
No, this position is not contingent upon program award

Schedule
Full time

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.